Zusammenfassung
Water is the largest ingredient in beer by volume, and its mineral content profoundly affects mash pH, hop perception, malt flavor, and yeast health. The most important concept in brewing Wasserchemie is Restalkalität (RA) — the buffering capacity left after calcium and magnesium react with phosphates from malt. Low-RA water suits pale beers; high-RA water suits dark beers. Dieser Leitfaden covers the Kolbach model for predicting mash pH, building water from scratch using reverse osmosis (RO) water, mineral salt additions, acid and base adjustments, and a comparison of the leading Wasserchemie software tools. All calculations are shown step by step.
Why Wasserchemie Matters in Allkorn Brewing
Extract brewers can largely ignore Wasserchemie. The manufacturer has already mashed the grain, and the resulting extract carries its own buffering capacity. But in Allkorn brewing, you are the one mashing. Your Wasserchemie determines:
- Mash pH. Affects enzyme activity, efficiency, tannin extraction, and flavor.
- Hop character. Sulfate-to-chloride ratio influences perceived Bittere and malt fullness.
- Yeast health. Calcium is essential for yeast Flockung and enzyme function. Minimum 50 ppm in the Würze.
- Beer stability. Proper mineral balance contributes to flavor stability over time.
- Color and clarity. pH affects both.
The Key Ions in Brewing Water
| Ion | Symbol | Flavor Effect | Typical Range (ppm) | Anmerkungen |
|---|---|---|---|---|
| Calcium | Ca²⁺ | Lowers mash pH, aids yeast health | 50–150 | Most important cation for brewing |
| Magnesium | Mg²⁺ | Yeast nutrient, bitter at high levels | 0–30 | >50 ppm contributes harsh Bittere |
| Sodium | Na⁺ | Rounds out malt flavor | 0–70 | >150 ppm harsh and salty |
| Sulfate | SO₄²⁻ | Enhances hop dryness and crispness | 0–350 | High for IPAs, low for malt-forward styles |
| Chloride | Cl⁻ | Enhances malt fullness and sweetness | 0–100 | >200 ppm medicinal/harsh |
| Bicarbonate | HCO₃⁻ | Raises mash pH (alkalinity source) | 0–250 | The villain of pale beer brewing |
Sulfate-to-Chloride Ratio
This ratio is arguably the most impactful flavor variable in brewing Wasserchemie.
| Ratio (SO₄/Cl) | Charakter | Style Examples |
|---|---|---|
| 3:1 to 9:1 | Dry, hop-forward, crisp | West Coast IPA, English bitter |
| 1:1 to 2:1 | Balanced | Amber ale, pale ale, pilsner |
| 1:2 to 1:3 | Malt-forward, full, smooth | Stout, Märzen, Scotch ale |
For a deep dive into IPA-specific Wasserprofils, see Ipa Water Profil Guide.
Residual Alkalinity: The Core Concept
Residual alkalinity (RA), developed by Paul Kohlbach in 1953, is the single most useful concept in brewing Wasserchemie. It measures the alkalinity (bicarbonate) that remains after calcium and magnesium react with malt phosphates to lower pH.
The Formula
RA = Alkalinity (as CaCO₃) − (Ca / 1.4) − (Mg / 1.7)
Where all values are in ppm as CaCO₃.
To convert raw ppm to “as CaCO₃” equivalents:
- Total alkalinity is often reported as CaCO₃ already (check your water report).
- Ca as CaCO₃ = Ca (ppm) × 2.497
- Mg as CaCO₃ = Mg (ppm) × 4.116
Simplified Working Formula
Using raw ppm directly:
RA = Total Alkalinity (as CaCO₃) − (Ca × 2.497 / 1.4) − (Mg × 4.116 / 1.7)
Which simplifies to:
RA = Alkalinity − (1.783 × Ca) − (2.421 × Mg)
Wait — let me correct that. The original Kolbach formula uses equivalent weights, and the standard simplified version in brewing is:
RA (as ppm CaCO₃) = Total Alkalinity (as ppm CaCO₃) − [Ca (ppm) / 1.4] − [Mg (ppm) / 1.7]
This version uses the raw ppm values of Ca and Mg as measured, and the constant denominators (1.4 and 1.7) are Kolbach’s empirical factors that account for the hardness contribution of each cation to mash pH reduction.
Worked Example
Your water report says:
- Total alkalinity: 150 ppm as CaCO₃
- Calcium: 80 ppm
- Magnesium: 15 ppm
RA = 150 − (80 / 1.4) − (15 / 1.7) RA = 150 − 57.1 − 8.8 RA = 84.1 ppm as CaCO₃
What RA Tells You
| RA (ppm CaCO₃) | Mash pH Tendency | Suitable For |
|---|---|---|
| < 0 | Acidic — mash pH will be low | Very pale beers; may need pH adjustment upward |
| 0–50 | Good for pale to amber beers | Pilsner, pale ale, IPA, Helles |
| 50–100 | Moderate — mash pH may be high for pale beers | Amber ale, brown ale |
| 100–150 | High — will need acid or dark malt to lower pH | Porter, stout |
| > 150 | Very high — challenging for most styles | Very dark stouts, or requires significant acid treatment |
The key insight: dark malts are acidic. They naturally lower mash pH. This is why historically, regions with high-alkalinity water (Dublin, London, Munich) brewed dark beers, while regions with low-alkalinity water (Pilsen, Burton) brewed pale beers. The water dictated the style.
The Kolbach Model: Predicting Mash pH
Kolbach’s work goes beyond RA. His extended model predicts mash pH based on Wasserchemie and Schüttung. While the full model requires software for practical use, the conceptual framework is:
-
Start with distilled water mash pH. Every malt, when mashed with distilled water, produces a characteristic pH. Base pale malt: ~5.7–5.8. Crystal 60L: ~4.7. Roasted barley: ~4.5. The weighted average of your Schüttung determines the “distilled water mash pH.”
-
Adjust for water RA. Higher RA pushes pH up. The relationship is approximately:
ΔpH ≈ 0.028 × RA (for a grist-to-water ratio of 1.5 qt/lb)
So RA of 84 would raise pH by ~2.4 units from the distilled water pH? No — that is too high. Let me clarify.
The slope depends on the specific model implementation. In der Praxis, the relationship is more like 0.0014 per ppm of RA for a standard mash thickness. This is where software becomes essential — the interactions between Schüttung, water volume, and mineral content are multivariate.
For practical purposes: use the RA table above as a guideline, and measure your actual mash pH with a calibrated pH meter. Adjust from there.
Building Water From Scratch
The most reliable approach to Wasserchemie is to start with RO (reverse osmosis) or distilled water and add minerals precisely. This eliminates the variability of municipal water.
Common Mineral Gabes
| Salt | Formula | Contributes | Grams per gallon for 1 ppm |
|---|---|---|---|
| Gypsum (Calcium sulfate) | CaSO₄·2H₂O | Ca: 61.5 ppm/g/gal, SO₄: 147.4 ppm/g/gal | Variable — see below |
| Calcium chloride | CaCl₂·2H₂O | Ca: 72.0 ppm/g/gal, Cl: 127.4 ppm/g/gal | Variable |
| Epsom salt (Magnesium sulfate) | MgSO₄·7H₂O | Mg: 26.1 ppm/g/gal, SO₄: 103.0 ppm/g/gal | Variable |
| Table salt (Sodium chloride) | NaCl | Na: 103.9 ppm/g/gal, Cl: 160.3 ppm/g/gal | Variable |
| Baking soda (Sodium bicarbonate) | NaHCO₃ | Na: 72.3 ppm/g/gal, HCO₃: 191.9 ppm/g/gal | Variable |
| Chalk (Calcium carbonate) | CaCO₃ | Ca: 105.8 ppm/g/gal, CO₃: 158.4 ppm/g/gal | Dissolves poorly; use acid pre-dissolved or pickling lime |
| Pickling lime (Calcium hydroxide) | Ca(OH)₂ | Ca: 143 ppm/g/gal, raises alkalinity | Use sparingly |
Note: The ppm/g/gal values above indicate the ppm of each ion contributed when 1 gram of the salt is added to 1 gallon of water.
Step-by-Step: Building a Pale Ale Water Profil
Target profile (loosely based on a balanced American pale ale):
| Ion | Target (ppm) |
|---|---|
| Ca | 75 |
| Mg | 5 |
| Na | 10 |
| SO₄ | 150 |
| Cl | 60 |
| HCO₃ | 0 (using RO water) |
Starting with 8 gallons of RO water (all ions at 0 ppm):
This is a system of equations. Each salt contributes two ions. You need to solve for the grams of each salt. In der Praxis, use software. But here is the manual approach:
Step 1: Address sulfate. Gypsum contributes 147.4 ppm SO₄ per gram per gallon. For 150 ppm SO₄ in 8 gallons: 150 / 147.4 = 1.02 g/gal × 8 gal = 8.14 g gypsum. This also adds: 61.5 × 1.02 = 62.7 ppm Ca. (Partway to our 75 ppm target.)
Step 2: Address remaining calcium and chloride. We need 75 − 62.7 = 12.3 ppm more Ca. CaCl₂ gives 72.0 ppm Ca per g/gal. 12.3 / 72.0 = 0.171 g/gal × 8 gal = 1.37 g calcium chloride. This also adds: 127.4 × 0.171 = 21.8 ppm Cl.
Step 3: Address remaining chloride. We need 60 − 21.8 = 38.2 ppm more Cl. NaCl gives 160.3 ppm Cl per g/gal. 38.2 / 160.3 = 0.238 g/gal × 8 gal = 1.91 g table salt. This also adds: 103.9 × 0.238 = 24.7 ppm Na. (Target was 10, we are at 24.7 — slightly high but acceptable.)
Step 4: Address magnesium. 5 ppm Mg from Epsom salt: 5 / 26.1 = 0.192 g/gal × 8 gal = 1.53 g Epsom salt. This also adds: 103.0 × 0.192 = 19.8 ppm SO₄. (Total SO₄ now ~170 — slightly over target.)
Final profile:
| Ion | Target | Actual | Difference |
|---|---|---|---|
| Ca | 75 | 75 | 0 |
| Mg | 5 | 5 | 0 |
| Na | 10 | 25 | +15 |
| SO₄ | 150 | 170 | +20 |
| Cl | 60 | 60 | 0 |
Close enough. The sodium and sulfate overshoot are within acceptable ranges. This is why software is valuable — it iterates quickly and optimizes across all ions simultaneously.
Acid Gabes for pH Control
Even with proper RA, you may need to fine-tune mash pH with acid. Common options:
| Acid | Concentration | Typical Dose | Anmerkungen |
|---|---|---|---|
| Lactic acid (88 %) | 88 % w/w | 1–3 mL per 5-gal mash | Most common, adds subtle tanginess at high doses |
| Phosphoric acid (10 %) | 10 % w/v | 2–5 mL per 5-gal mash | Flavor-neutral, preferred by many |
| Acidulated malt | ~2 % lactic acid by weight | 1–5 % of grist | Conforms to Reinheitsgebot; 1 % of grist lowers pH ~0.1 |
How to Use Acid
- Mash in and wait 10 minutes for pH to stabilize.
- Measure pH with a calibrated meter (not strips — strips are ±0.3 units, useless for precision work).
- If pH is above 5.4, add acid in small increments (0.5 mL), stir, wait 2 minutes, re-measure.
- Target: 5.2–5.4 at Maischetemperatur (5.5–5.7 at room temperature, due to the ~0.3 unit offset).
For understanding how pH interacts with enzyme optima and Maischetemperatur, see Maischetemperatur Guide Enzyme Activity.
Famous Brewing Water Profils
| City | Ca | Mg | Na | SO₄ | Cl | HCO₃ | Known For |
|---|---|---|---|---|---|---|---|
| Pilsen | 7 | 2 | 2 | 5 | 5 | 15 | Very soft; Bohemian pilsner |
| Burton-on-Trent | 275 | 40 | 25 | 610 | 35 | 260 | Extremely hard; English pale ale |
| Dublin | 120 | 4 | 12 | 55 | 19 | 315 | High alkalinity; stout |
| Munich | 77 | 18 | 2 | 10 | 2 | 295 | High alkalinity; dunkel, bock |
| London | 70 | 6 | 15 | 40 | 38 | 160 | Moderate; porter, mild |
| Vienna | 200 | 60 | 8 | 125 | 12 | 120 | Hard; Vienna lager |
Important: You do not need to exactly replicate these profiles. They are historical guides, not precise recipes. Modern brewers use them as starting points and adjust based on their specific Schüttung and target pH.
Software Tools Comparison
Manual water calculations are educational but slow. Software makes brew-day Wasserchemie practical.
| Tool | Platform | Cost | Key Strengths | Limitations |
|---|---|---|---|---|
| Bru’n Water | Excel spreadsheet | Free (donations encouraged) | Detailed mash pH prediction (Kolbach-derived model), acid addition calculator, widely validated | Spreadsheet interface, not intuitive, requires Excel or Google Sheets |
| Brewfather | Web + mobile app | Free tier / $2.99/mo premium | Integrated with full recipe builder, automatic water adjustment suggestions, clean UI | pH model less detailed than Bru’n Water |
| BeerSmith 3 | Desktop + mobile | $27.99 (one-time) | Comprehensive recipe + water tool, large community recipe library | Water module is adequate but not its strongest feature |
| EZ Water Calculator | Excel spreadsheet | Free | Simple, fast, good for beginners | Less accurate pH prediction than Bru’n Water |
| Brewers Friend | Web app | Free tier / $2.99/mo | Water chemistry tool integrated into recipe builder, sparge acidification | pH model is simplified |
Recommendation: Start with Bru’n Water for learning (it shows every calculation) and move to Brewfather for daily use once you understand the fundamentals.
Water Reports: What You Need
Contact your municipal water utility and request the annual water quality report (also called Consumer Confidence Report in the US). You need:
- Calcium (Ca)
- Magnesium (Mg)
- Sodium (Na)
- Sulfate (SO₄)
- Chloride (Cl)
- Bicarbonate (HCO₃) or Total Alkalinity (as CaCO₃)
- pH
If your utility does not report bicarbonate separately, you can calculate it:
HCO₃ (ppm) = Total Alkalinity (as CaCO₃) × 1.22
For precision, submit a water sample to Ward Laboratories (about $30 for the Brewer’s Analysis). This is the gold standard — municipal reports are averages and may not reflect seasonal variation.
Affiliate-Hinweis: GärungTools.net erhält eine Provision für qualifizierte Käufe ohne zusätzliche Kosten für dich. Wir empfehlen nur Produkte, die wir selbst verwendet oder gründlich bewertet haben.
Practical Workflow for Brautag
- Before Brautag: Enter your water report into Bru’n Water or Brewfather. Enter your Schüttung. Let the software calculate mineral additions and predicted mash pH.
- Measure salts. Use a precision scale (0.1 g resolution). Add mineral salts to your Einmaischwasser and stir until dissolved.
- Mash in. Wait 10–15 minutes for pH to stabilize.
- Measure mash pH. Use a calibrated digital pH meter. Compare to software prediction.
- Adjust if needed. Add acid (lactic or phosphoric) in 0.5 mL increments if pH is above target. Add baking soda or pickling lime if below target (rare with proper RA calculation).
- Treat Nachgusswasser separately. Sparge water should be acidified to pH 5.5–6.0 to prevent tannin extraction. Add 1–2 mL of lactic acid per 5 gallons of Nachgusswasser and verify with a pH meter.
For complete Nachgusswasser volume calculations, see Nachgusswasser Calculation Guide.
Common Wasserchemie Mistakes
1. Using Tap Water Without Knowing Its Profil
Municipal water varies seasonally, especially surface water sources. Spring snowmelt can halve your mineral content. Test quarterly or use RO water.
2. Over-Mineralizing
More calcium is not always better. Above 200 ppm Ca, beer can taste minerally and harsh. Sulfate above 400 ppm tastes sharp and sulfury. Chloride above 150 ppm can produce a “salty” or medicinal character.
3. Ignoring Nachgusswasser pH
Even if your mash pH is perfect, Läutern with unacidified alkaline water (pH 8+) can extract tannins. Always check and adjust Nachgusswasser pH.
4. Confusing Chloride (Cl⁻) with Chlorine (Cl₂)
Chlorine and chloramine are municipal water disinfectants that produce chlorophenol Fehlaromen in beer at very low concentrations (8 ppb). Remove them with activated carbon filtration or Campden tablets (one tablet per 20 gallons). Chloride the ion (Cl⁻) is a normal and desirable mineral in brewing water.
5. Chasing Historical Profils Too Literally
You do not need 610 ppm sulfate to brew a good English bitter. Burton water is extreme. A sulfate level of 150–250 ppm, with a sulfate-to-chloride ratio of 2:1 to 3:1, produces excellent hop-forward beers without the minerally harshness of full “Burtonization.”
Methodik
This article references the following primary sources:
- Kohlbach, P. (1953). “Der Einfluss des Brauwassers auf das pH der Würze und des Bieres” (The influence of brewing water on the pH of Würze and beer). Monatsschrift für Brauerei, 6:44–52. The original Restalkalität paper.
- Palmer, J., and Kaminski, C. (2013). Water: A Comprehensive Guide for Brewers. Brewers Publications. The definitive Hobbybrauen reference on Wasserchemie.
- Troester, K. (2009). “The effect of brewing water and grist composition on the pH of the mash.” Braukaiser.com. Experimental validation of the Kolbach model at homebrew scale.
- De Clerck, J. (1957). A Textbook of Brewing. Chapman & Hall. Historical city Wasserprofils.
- Bru’n Water spreadsheet documentation (Martin Brungard). Detailed explanation of the RA model, acid addition calculations, and mash pH prediction methodology.
- Ward Laboratories (wardlab.com). Reference for water testing protocols and interpretation of results for brewers.
- Brewfather and BeerSmith documentation for software feature comparisons. Feature sets verified against current versions as of 2025.
Ion contribution values for mineral salts (grams per gallon per ppm) are calculated from molecular weights and confirmed against Palmer & Kaminski (2013) Table 5.1.